A risk-free, end to end service from sales, to installation and maintenance.
GROSS POLLUTANT TRAPS
Highly engineered water quality devices, deployed directly into the stormwater system to capture contaminants close to the surface.
A vertically configured pollutant trap suitable for low risk applications.
Concrete or fibreglass structures containing a series of sediment settling chambers separated by baffles.
Non-blocking hydrodynamic separator with a unique screen and treatment action, resulting in excellent pollution removal performance and high water quality outcomes.
A heavy duty channel drainage system uniquely designed for industrial environments.
The SPEL HydroChannel is a WSUD drainage system, offering a decentralized and absolutely new path for stormwater treatment.
HYDROCARBONS, NUTRIENTS & REMAINING SOLIDS
A full retention separator to treat all flows, with two chambers, a coalescer and an automatic closure device.
A horizontally configured, two-chamber Stormwater Quality Improvement Device, equipped with a gravity enhancing coalescer unit. Offline version available.
A combination of the Stormceptor and Puraceptor functions and features in the one, easy to install, treatment device.
FINAL CLEANING PROCESS FOR WASTEWATER RE-USE
A highly advanced stormwater filtration system. It’s size and capacity make it ideal for small footprint stormwater treatment train.
A low-cost way to enhance municipal wastewater treatment. Can be retro-fit into existing facilities or waterways.
A specialist stormwater filter, designed for installation within load bearing shafts and chambers of concrete and plastic construction.
A cartridge filter system incorporating an up-flow treatment process that maximising surface treatment area.
A tank manufactured to handle such substances as water, sewage, farm effluent, petroleum products and chemicals.
DETENTION & RETENTION
On open bottomed, high-density polyethylene infiltration chamber for subsurface retention or detention of stormwater run off.
FINAL CLEANING PROCESS FOR WASTEWATER RE-USE
Guaranteed hydrocarbon spill capture in all flow and spill conditions
- Car Parks
- Shopping Centres
- Council Depots
- Industrial Estates
- Heavy Vehicle Maintenance
- Airport Aprons & Tarmacs
- Loading Bays & Transport Depots
- Highway & Transport Corridors
- Recycling Yards
SPEL Stormceptor can fit pipe sizes from 160mm to 1500mm, including box culvert designs. Larger sizes are available on request.
An accepted and proven performer in Europe, SPEL Stormceptor Class 1 has undergone rigorous testing to ensure it meets Australian conditions and complies with the objectives set by the regulating authorities.
SPEL Stormceptor Class 1 is suited as a secondary treatment, removing sediment, suspended solids, hydrocarbons and nutrients.
The unique SPEL Stormceptor Class 1 flow action — in conjunction with the two internally sealed chambers and filter media — ensures permanent quiescent conditions in the primary and secondary separation chamber (no turbulence or agitation). Optimal treatment performance is maintained whilst the device is in ‘bypass mode’.
The SPEL Stormceptor Class 1 function ensures there is no scouring or re-suspension of separated pollutants. This means that the treatment process is maintained — even in flood and tidal zones.
This ensures that the tertiary biological treatment phase (if required) of a stormwater treatment chain is not encumbered with excessive pollutants and can also realise a long life with fewer maintenance frequencies.
Easy and safe, with no entering of the tank required.
QLD > Approval by all Queensland Councils
Cleaning and Maintenance
Coalescer units are easy to maintain and easily washable even without maintenance for years.
It provides a coalescing process for the separation of smaller globular light liquid pollutants to reduce the light liquid content in the outlet to 5mg/litre or less.
CLEANING COALESCER UNITS
- Coalescer Guiderails
- Facilitates easy insertion
- Manufactured in stainless steel
- Incorporated into SPEL Puraceptors and SPEL Stormceptors Class 1
- Fixed brackets
- Fixed stainless steel guide rail
- Unit guided at correct angle into conical base
Quote Request Form
Please take a moment to complete this form and we will be in touch to discuss your options.
The proof is in the pudding. We invite you to take a moment to review our case studies, projects, videos and images showcasing the SPEL Maintenance Team.